Sayfalar

Free Permalink Builder/creator from post header

If you are a blogger or use wordpress or any other blog platform, you are bored with build permalink from post header.Me too.So i write out a script to this issue.You can create a clean permalik from your post header.This will be lowercase , nonspecial char and sperated words by - sign.


Post Header Linki Oluştur

Example:
Free Permalink Builder/creator from post header

Free Online Link Creator/Builder:You can link to any web site or blog

If you want to create a link to any web site or blog , you can this very easy and free way.To built link this way, write link text and link target adres fields and press create link button.It will be create link codes below the form.it is just that easy.Now you can copy the code and paste anywhere you wish.Is it easy?




Link Text Here Link Target Address Here Create Link

Example :
Free Online Link Creator/Builder:You can link to any web site or blog

How to place adsense code below of post header to boost revenue

If you want to

increase your adsense revenue

, you must

install your adsense code

different part of page to more available and

increase clicking rate

.

to place adsense code after post header.


1-copy your

adsense code

(ax15 texts)
2-

parse your code

from any parser or here
3-

backup your full template

from blog panel-template and download your computer
4-open your templatexxx.xml
5-find

<b:if cond='data:post.title'>


6-find

first </h3> code

from 5th
7-paste

parsed adsense code after </h3> tag

and save template
8-upload your

new template

to blogger.
Goodluck
How to place adsense code below of post header to boost revenue

Windows 8 Find your applications

The Win+X menu is useful, but no substitute for the old Start menu as it doesn't provide access to your applications. To find this, hold down the Windows key and press Q or either right-click an empty part of the Start screen or swipe your finger up from the bottom of the screen and select 'All Apps' to reveal a scrolling list of all your installed applications. Browse the various tiles to find what you need and click the relevant app to launch it.
Windows 8 Find your applications

Windows 8 Shut Down (shortcuts-'Shut Down', 'Restart', 'Sign Out' or 'Switch User')

To shut Windows 8 down,
1-just move the mouse cursor to the bottom right corner of the screen, click the Settings icon - or just hold down the Windows key and press I - and you'll see a power button. Click this and choose 'Shut Down' or 'Restart'.
2-Some of the tricks available in previous versions of Windows still apply. Press Ctrl+Alt+Del, for instance, click the power button in the bottom right-hand corner and you'll be presented with the same 'Shut Down' and 'Restart' options.
3-And if you're on the desktop, press Alt+F4 and you'll be able to choose 'Shut Down', 'Restart', 'Sign Out' or 'Switch User' options.
Windows 8 Shut Down (shortcuts-'Shut Down', 'Restart', 'Sign Out' or 'Switch User')

How to make Mozilla Firefox 30 times faster

1. Type "about:config" into the address bar and hit return. Scroll down and look for the following entries:
network.http.pipelining
network.http.proxy.pipelining
network.http.pipelining.maxrequests
Normally the browser will make one request to a web page at a time.When you enable pipelining it will make several at once, which really speeds up page loading.
2. Alter the entries as follows:
Set "network.http.pipelining" to "true"
Set "network.http.proxy.pipelining" to "true"
Set "network.http.pipelining.maxrequests" to some number like 30. This means it will make 30 requests at once.
3. Lastly right-click anywhere and select New-> Integer.
Name it "nglayout.initialpaint.delay" and set its value to "0". This value is the amount of time the browser waits before it acts on information it receives.If you're using a broadband connection you'll load pages 2-30 times faster now

How to Shutdown a Computer with a Cell Phone


Using this method, a user can shutdown, restart, hibernate, etc. his or her computer,
just by sending an email from his or her phone.
To do this, all you will need is Microsoft Outlook which should come with Microsoft
Office, which most people have. This will need to be on the computer wish you wish to
shutdown.
So, this is how you do this:
1. First, you need the batch files to perform the Shutdown, Hibernate etc. You can
write them down yourselves or can download them from here.
2. Extract them to your C:\ drive so the path to the shutdown batch file is
C:\sms_functions\shutdown.bat (Important this is a must the path must be exact)
or you can modify the rule once you import it to point to the new destination, it's
your call.
3. Open up Microsoft Outlook. Make sure that you have already configured it for
your email.Now we will need to make it so that Outlook checks your inbox about every
minute (1 minute for testing time can be increased if a delayed shutdown is desired).
You can do this by going to Tools: Options.
4. Then click the Mail Setup tab, and afterwards, the Send/Receive button.
5. Make sure that the Schedule an automatic send/receive every... box is checked,
and set the number of minutes to 1. Now you may close all of these dialog boxes.
6. Now go to Tools: Rules and Alerts... Next click the options button in the upper
right hand corner and press the Import Rules button.
7. Now select the shutdown.rwz file that was found in the zip file named
sms_functions that you downloaded.
8. Now, when you send a message from your phone to your e-mail address with the
subject smsshutdown%%, your computer will shutdown.
You can also make your own rule, so that you can use your own batch file, and may
specify the phrase you want to trigger the action.

How to hide files in a jpg


Set up:
1. Must have a .zip or .rar compressor.
2. Willingness to learn.
Steps:
1. Save the picture of choice to your desktop.
2. Make a new .rar or .zip folder on your desktop.
3. Add the files you want to hide into the .zip or .rar
4. Click start menu, run, cmd.
5. In Command Prompt type cd "desktop" with the quotation marks.
6. Now type in copy /b picturename.jpg + foldername.rar outputfilename.jpg
( If you use .zip then: copy /b picturename.jpg + foldername.zip outputfilename.jpg)
7. Now there should be the outputed file name with a .jpg extension on the desktop.
( Do not close Command Prompt just yet )
8. Double click it to open the picture and check it out.
9. When your done looking, and want to view the hidden files
Type: ren outputfilename.jpg outputfilename.rar  or zip
Now you're done!
A quick info-fact:
With this technique of hiding files in a jpg you can send this to anyone and they just
have to rename the file extension to .zip or .rar.
With this technique the Al-Qaeda operatives were able to send info to others
secretively.

How to hack someone with his IP address


Introduction
1. Welcome to the basic NETBIOS document created by aCId_rAIn. This document
will teach you some simple things about NETBIOS, what it does, how to use it, how to
hack with it, and some other simple DOS commands that will be useful to you in the
future.
1. Hardware and Firmware
1a. The BIOS
The BIOS, short for Basic Input/Output Services, is the control program of the PC.
It is responsible for starting up your computer, transferring control of the system to
your operating system, and for handling other low-level functions, such as disk access.
NOTE that the BIOS is not a software program, insofar as it is not purged from
memory when you turn off the computer. It's
firmware, which is basically software on a chip.
A convenient little feature that most BIOS manufacturers include is a startup
password. This prevents access to the system until you enter the correct password.
If you can get access to the system after the password has been entered, then there
are numerous software-based BIOS password extractors available from your local
H/P/A/V site.
NETBIOS/NBTSTAT - What does it do?
2. NETBIOS, also known as NBTSTAT is a program run on the Windows system and is
used for identifying a remote network or computer for file sharing enabled. We can
expoit systems using this method. It may be old but on home pc's sometimes it still
works great. You can use it on your friend at home or something. I don't care what
you do, but remember, that you are reading this document because you want to learn.
So I am going to teach you. Ok. So, you ask, "How do i get to NBTSTAT?" Well, there
are two ways, but one's faster.
Method 1:Start>Programs>MSDOS PROMPT>Type NBTSTAT
Method 2:Start>Run>Type Command>Type NBTSTAT
(Note: Please, help your poor soul if that isn't like feeding you with a baby spoon.)
Ok! Now since you're in the DOS command under NBTSTAT, you're probably
wondering what all that crap is that's on your screen. These are the commands you
may use. Your screen should look like the following:
NBTSTAT [ [-a RemoteName] [-A IP address] [-c] [-n]
[-r] [-R] [-RR] [-s] [-S] [interval] ]
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
-c (cache) Lists NBT's cache of remote [machine] names and their IP addresses
-n (names) Lists local NetBIOS names.
-r (resolved) Lists names resolved by broadcast and via WINS
-R (Reload) Purges and reloads the remote cache name table
-S (Sessions) Lists sessions table with the destination IP addresses
-s (sessions) Lists sessions table converting destination IP addresses to computer
NETBIOS names.
-RR (ReleaseRefresh) Sends Name Release packets to WINS and then, starts
Refresh
RemoteName Remote host machine name.
IP address Dotted decimal representation of the IP address.
interval Redisplays selected statistics, pausing interval seconds between each display.
Press Ctrl+C to stop redisplaying
statistics.
C:\WINDOWS\DESKTOP>
The only two commands that are going to be used and here they are:
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
                                                  Host Names
3. Now, the -a means that you will type in the HOST NAME of the person's computer
that you are trying to access. Just in case you don't have any idea what a Host Name
looks like here's an example.
123-fgh-ppp.internet.com
there are many variations of these adresses. For each different address you see
there is a new ISP assigned to that computer. look at the difference.
abc-123.internet.com
ghj-789.newnet.com
these are differnet host names as you can see, and, by identifying the last couple
words you will be able to tell that these are two computers on two different ISPs.
Now, here are two host names on the same ISP but a different located server.
123-fgh-ppp.internet.com
567-cde-ppp.internet.com                                                    IP Addresses
4. You can resolce these host names if you want to the IP address (Internet Protocol)
IP addresses range in different numbers. An IP looks like this:
201.123.101.123
Most times you can tell if a computer is running on a cable connection because of the
IP address's numbers. On faster connections, usually the first two numbers are low.
here's a cable connection IP.
24.18.18.10
on dialup connections IP's are higher, like this:
208.148.255.255
notice the 208 is higher than the 24 which is the cable connection.
REMEMBER THOUGH, NOT ALL IP ADDRESSES WILL BE LIKE THIS.
Some companies make IP addresses like this to fool the hacker into believing it's a
dialup, as a hacker would expect something big, like a T3 or an OC-18. Anyway This
gives you an idea on IP addresses which you will be using on the nbtstat command.
                           Getting The IP Through DC (Direct Connection)
5. First. You're going to need to find his IP or host name. Either will work. If you are
on mIRC You can get it by typing /whois (nick) ...where (nick) is the persons nickname
without parenthesis. you will either get a host name or an IP. copy it down. If you do
not get it or you are not using mIRC then you must direct connect to their computer
or you may use a sniffer to figure out his IP or host name. It's actually better to do
it without the sniffer because most sniffers do not work now-a-days. So you want to
establish a direct connection to their computer. OK, what is a direct connection?
When you are:
Sending a file to their computer you are directly connected.
AOL INSTANT MESSENGER allows a Direct Connection to the user if accepted.
ICQ when sending a file or a chat request acception allows a direct connection.
Any time you are sending a file. You are directly connected. (Assuming you know the
user is not using a proxy server.)
Voice Chatting on Yahoo establishes a direct connection.
If you have none of these programs, either i suggest you get one, get a sniffer, or
read this next statement.
If you have any way of sending thema link to your site that enables site traffic
statistics, and you can log in, send a link to your site, then check the stats and get
the IP of the last visitor. It's a simple and easy method i use. It even fool some
smarter hackers, because it catches them off guard. Anyway, once you are directly
connected use either of the two methods i showed you earlier and get into DOS. Type
NETSTAT -n. NETSTAT is a program that's name is short for NET STATISTICS. It
will show you all computers connected to yours. (This is also helpful if you think you
are being hacked by a trojan horse and is on a port that you know such as Sub Seven:
27374.) Your screen should look like this showing the connections to your computer:
------------------------------------------------------------------------------------------------
C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 205.188.8.7:26778 ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------
The first line indicated the Protocol (language) that is being used by the two
computers.
TCP (Transfer Control Protocol) is being used in this and is most widely used.
Local address shows your IP address, or the IP address of the system you on.
Foreign address shows the address of the computer connected to yours.
State tells you what kind of connection is being made ESTABLISHED - means it will
stay connected to you as long as you are on the program or as long as the computer is
allowing or is needing the other computers connection to it. CLOSE_WAIT means the
connection closes at times and waits until it is needed or you resume connection to be
made again. One that isn't on the list is TIME_WAIT which means it is timed. Most
Ads that run on AOL are using TIME_WAIT states.
the way you know the person is directly connected to your computer is because of
this:
------------------------------------------------------------------------------------------------
C:\WINDOWS\DESKTOP>netstat -n
Active Connections
Proto Local Address Foreign Address State
TCP 172.255.255.82:1027 205.188.68.46:13784 ESTABLISHED
TCP 172.255.255.82:1036 205.188.44.3:5190 ESTABLISHED
TCP 172.255.255.82:1621 24.131.30.75:66 CLOSE_WAIT
TCP 172.255.255.82:1413 abc-123-ppp.webnet.com ESTABLISHED
TCP 172.255.255.82:1483 64.4.13.209:1863 ESTABLISHED
C:\WINDOWS\DESKTOP>
------------------------------------------------------------------------------------------------Notice the host name is included in the fourth line instead of the IP address on all.
This is almost ALWAYS, the other computer that is connected to you. So here, now,
you have the host name:
abc-123-ppp.webnet.com
If the host name is not listed and the IP is then it NO PROBLEM because either one
works exactly the same. I am using abc-123-ppp.webnet.com host name as an example.
Ok so now you have the IP and/or host name of the remote system you want to
connect to. Time to hack!
Open up your DOS command. Open up NBTSTAT by typing NBTSTAT. Ok, there's
the crap again. Well, now time to try out what you have leanred from this document
by testing it on the IP and/or host name of the remote system. Here's the only thing
you'll need to know.
IMPORTANT, READ NOW!!!
-a (adapter status) Lists the remote machine's name table given its name
-A (Adapter status) Lists the remote machine's name table given its IP address.
Remember this?
Time to use it.
-a will be the host name
-A will be the IP
How do i know this?
Read the Statements following the -a -A commands. It tells you there what each
command takes.
So have you found which one you have to use?
GOOD!
Time to start.
                                          Using it to your advantage
6. Type this if you have the host name only.
NBTSTAT -a (In here put in hostname without parenthesis)
Type this is you have the IP address only.
NBTSTAT -A (In here put in IP address without parenthesis)
Now, hit enter and wait. Now Either one of two things came up
1. Host not found
2. Something that looks like this:
--------------------------------------------
NetBIOS Local Name Table
Name Type Status
---------------------------------------------
GMVPS01 <00> UNIQUE Registered
WORKGROUP <00> GROUP Registered
GMVPS01 <03> UNIQUE Registered
GMVPS01 <20> UNIQUE Registered
WORKGROUP <1e> GROUP Registered---------------------------------------------
If the computer responded "Host not found" Then either one of two things are the
case:
1. You screwed up the host name.
2. The host is not hackable.
If number one is the case you're in great luck. If two, This system isn't hackable
using the NBTSTAT command. So try another system.
If you got the table as above to come up, look at it carefully as i describe to you each
part and its purpose.
Name - states the share name of that certain part of the computer
<00>, <03>, <20>, <1e> - Are the Hexidecimal codes giving you the services available on 
that share name.
Type - Is self-explanatory. It's either turned on, or activated by you, or always on.
Status - Simply states that the share name is working and is activated.
Look above and look for the following line:
GMVPS01 <20> UNIQUE Registered
See it?
GOOD! Now this is important so listen up. The Hexidecimanl code of <20> means that 
file sharing is enabled on the share name that is on that line with the hex number. So
that means GMVPS01 has file sharing enabled. So now you want to hack this. Here's
How to do it. (This is the hard part)
                                                  LMHOST File
7. There is a file in all Windows systems called LMHOST.sam. We need to simply add
the IP into the LMHOST file because LMHOST basically acts as a network,
automatically logging you on to it. So go to Start, Find, FIles or Folders. Type in
LMHOST and hit enter. when it comes up open it using a text program such as
wordpad, but make sure you do not leave the checkmark to "always open files with
this extension" on that. Simply go through the LMHOST file until you see the part:
# This file is compatible with Microsoft LAN Manager 2.x TCP/IP lmhosts
# files and offers the following extensions:
#
# #PRE
# #DOM:
# #INCLUDE
# #BEGIN_ALTERNATE
# #END_ALTERNATE
# \0xnn (non-printing character support)
#
# Following any entry in the file with the characters "#PRE" will cause
# the entry to be preloaded into the name cache. By default, entries are
# not preloaded, but are parsed only after dynamic name resolution fails.
## Following an entry with the "#DOM:" tag will associate the
# entry with the domain specified by . This affects how the
# browser and logon services behave in TCP/IP environments. To preload
# the host name associated with #DOM entry, it is necessary to also add a
# #PRE to the line. The is always preloaded although it will not
# be shown when the name cache is viewed.
#
# Specifying "#INCLUDE " will force the RFC NetBIOS (NBT)
# software to seek the specified and parse it as if it were
# local. is generally a UNC-based name, allowing a
# centralized lmhosts file to be maintained on a server.
# It is ALWAYS necessary to provide a mapping for the IP address of the
# server prior to the #INCLUDE. This mapping must use the #PRE directive.
# In addtion the share "public" in the example below must be in the
# LanManServer list of "NullSessionShares" in order for client machines to
# be able to read the lmhosts file successfully. This key is under
# \machine\system\currentcontrolset\services\lanmans
erver\parameters\nullsessionshares
# in the registry. Simply add "public" to the list found there.
#
# The #BEGIN_ and #END_ALTERNATE keywords allow multiple #INCLUDE
# statements to be grouped together. Any single successful include
# will cause the group to succeed.
#
# Finally, non-printing characters can be embedded in mappings by
# first surrounding the NetBIOS name in quotations, then using the
# \0xnn notation to specify a hex value for a non-printing character.
Read this over and over until you understand the way you want your connection to be
set. Here's an example of how to add an IP the way I would do it:
#PRE #DOM:255.102.255.102 #INCLUDE
Pre will preload the connection as soon as you log on to the net. DOM is the domain or
IP address of the host you are connecting to. INCLUDE will automaticall set you to
that file path. In this case as soon as I log on to the net I will get access to
255.102.255.102 on the C:/ drive. The only problem with this is that by doin the
NETSTAT command while you are connected, and get the IP of your machine. That's
why it only works on simple PC machines. Because people in these days are computer
illiterate and have no idea of what these commands can do. They have no idea what
NETSTAT is, so you can use that to your advantage. Most PC systems are kind of
hard to hack using this method now because they are more secure and can tell when
another system is trying to gain access. Also, besure that you (somehow) know
whether they are running a firewall or not because it will block the connection to
their computer. Most home systems aren't running a firewall, and to make it better, they don't know how operate the firewall, therefore, leaving the hole in the system.
To help you out some, it would be a great idea to pick up on some programming
languages to show you how the computer reads information and learn some things on
TCP/IP (Transfer Control Protocol/Internet Protocol) If you want to find out
whether they are running a firewall, simply hop on a Proxy and do a port scan on their
IP. You will notice if they are running a firewall because most ports are closed. Either
way, you still have a better chance of hacking a home system than hacking Microsoft.
                                                       Gaining Access
7. Once you have added this to you LMHOST file. You are basically done. All you need
to do is go to:
Start
Find
Computer
Once you get there you simply type the IP address or the host name of the system.
When it comes up, simply double click it, and boom! There's a GUI for you so you
don't have to use DOS anymore. You can use DOS to do it, but it's more simple and
fun this way, so that's the only way i put it. When you open the system you can edit,
delete, rename, do anything to any file you wish. I would also delete the command file
in C:/ because they may use it if they think someone is in their computer. Or simply
delete the shortcut to it. Then here's when the programming comes in handy. Instead
of using the NBTSTAT method all the time, you can then program you own trojan on
your OWN port number and upload it to the system. Then you will have easier access
and you will also have a better GUI, with more features. DO NOT allow more than one
connection to the system unless they are on a faster connection. If you are
downloading something from their computer and they don't know it and their
connection is being slow, they may check their NETSTAT to see what is connected,
which will show your IP and make them suspicious. Thats it. All there is to it. Now go
out and scan a network or something and find a computer with port 21 or something
open.

How to grab IP address with PHP


Today I’ll be showing you how to grab somebodies IP address when they visit a page.
The variable to use is $_SERVER['REMOTE_ADDR'] - It’s that simple. You can use it
for just about anything, here are a few examples.
Printing the Users IP Address:
print ($_SERVER['REMOTE_ADDR'], "I'm Watching You!");
?>
Printing it to a File:
$ip = $_SERVER['REMOTE_ADDR'];
$handle = fopen('ipaddresses.txt'', 'a+);
fwrite($handle, $ip); fwrite($handle, "\n");
fclose($handle);
?>
All you have to do, is to make a text file and insert any of these codes or one of your
own and save it as anythingyouwant.php
Then upload it to your website and it'll do the trick :P
The Possibilities for what you can use this to are endless.

How To Close Ports

So i've been looking for a while on just how to close a port on a computer. I simply couldn't find a way. Well, i finally found it. This'll only work for windows users (unless your unix version OS has netsh). it's actually quite simple. here's the command for it: netsh firewall delete portopening TCP portnumber it's that simple.
Simply go to START -> RUN -> and type in that command up there, and it'll close it for you. or, you can also open up command prompt (START -> RUN -> CMD) and type in "netsh" without the quotes to get to your windows firewall settings. however, since i'm such a nice guy, i wrote it all out in a vbs script for you so that it's automatically runable. as well as a batch script. so here you are fellas: .
VBS Script
set ss = createobject("wscript.shell")
set ws = wscript
dim PORT PORT = InputBox("Enter the port you wish to close:")
 ss.run "netsh.exe"
ws.sleep 1000
ss.sendkeys "firewall delete portopening TCP " & PORT
ss.sendkeys "{enter}"
ws.sleep 500 'ss.sendkeys "exit" '
ss.sendkeys "{enter}"
 .BAT Script
@echo off
title Port Closer
echo Port Closer
echo. set /p port=Type the port number you wish to close here: netsh firewall delete portopening TCP %port% msg /w * Port %port% has been closed.
exit

How to change your folders background

Step 1: Have the Folder you want to put the background on open!
Step 2: Open up Notepad, then simply paste in this code: [{BE098140-A513-11D0-A3A4-00C04FD706EC}] iconarea_image=***Picture Location Here!***\***Name of File!***
Step 3: Go to ur picture (the picture you want to use!) and right click and select properties and find the file location for example lets say my file is in "my hardrive" it would be located at "C:\\" understand? copy the location!
Step 4: Now go back to ur text document (notepad) and where it says ***Picture Location Here!*** paste the location...u copied in the previus step!
Step 5: Now after u've done that where it says ***Name of File!*** type the name of the file including the .jpg .bmp .bip. jpeg etc
Step 6: Save the text document as "desktop.ini" be sure to remember the .ini extension! click Save as "All Files" not "Text Document" and save the document in the folder where u want the background to be! Now just close the folder and open it again it should show the picture as a background!


Popüler Yayınlar